OWON HDS2102S 2channel oscilloscope 3.5" LCD multimeter and a Function Generator All in one Handheld oscilloscope

Specifications Sample rate500 MSa/s (single channel) 250 MSa/s (dual channel) Memory depth 8 kpts (single channel) 4 kpts (dual channel) Vertical resolution 8 bit Trigger types Edge Waveform capture rate10 000 wfms/s Rise time≤5 ns typ. Vertical scale10 mV/div - 10 V/div Horizontal scale2 ns/div - 1000 s/div Measuring parameters (vertical)Vmax, Vmin, Vpp, Mean, Amplitude Measuring parameters (horizontal)Period, Freq Multimeter mode specifications SpecificationsRangeAccuracy (smallest range) DC voltage0.01 mV - 1000 V±0.5% + 5 AC voltage0.01 mV - 750 V±0.8% + 5 DC current10 μA - 10 A±0.8% + 2 AC current10 μA - 10 A±1% + 5 Resistance0.01 Ω - 100 MΩ±0.8% + 3 Capacitance1 pF - 2 mF±3% + 10 Function generator mode specification s Channels1 Amplitude0.01 Vpp ~ 2.5 Vpp Frequency25 MHz (sine) Sample rate125 MSa/s Vertical resolution14 bits Waveform length8 kpts Frequency resolution0.1 Hz Waveform typessine, square, ramp, pulse, sinc, bessely, besselj, stair up, stair down, stair up-down, att alt, amp alt Other modesContinuity, diode test Display20,000 counts (multimeter mode) 3.5" colour LCD (320 x 240) Power supply2x 18650 battery (approx. 6 hours) ConnectivityUSB-C Dimensions198 x 38 x 96 mm LxWxH Weight600 g (without batteries) Accessories The HDS2102S comes by default with: USB cable Set of test leads Probe BNC - alligator clips cable Power adapter Carrying pouch

• The HDS2102S is a portable dual-channel oscilloscope that can also be used as a multimeter and a function generator. The meter sports a 3.5" high-contrast colour display suitable for outdoor use and it runs on a pair of 18650 batteries, good for up to 6 hours of continuous use. You can hook up the meter to a PC host with USB-C to use it with Owon's desktop software, control it via SCPI or to use it with a power bank. C
• Signals can be recorded and stored internally. Its memory holds up to 8k data points. Waveforms can also be stored as image or CSV, to be exported via USB to a PC host.
• Besides being an oscilloscope, it independently acts as a fully featured 20 000 count True-RMS multimeter. It has the capability to measure voltage, current, resistance, capacitance, continuity and diodes. The readings will be displayed comfortably large on the display as can be seen in the demonstration video below. Similar to conventional multimeters, it has auto ranging.